Flexible Impeller Pump, 5 GPM Part Number 125600001

This plastic body, self-priming impeller pump will produce a wet suction lift of about 4' and has a maximum head of 20'. When dry, it will prime about 1.5'. Use for bilge pumping, livewell circulation, washdown, and general pumping requirements. Cannot be run dry. Permanent magnet type motor is fully enclosed with a stainless steel shaft and complies with USCG Electrical Standards (Title 33, Chapter I, Part 183, Subpart 1) for ignition protection on gasoline powered vessels. If the water contains a significant amount of oil, replace the neoprene impeller with an oil resistant nitrile impeller #6303-0003.

• Ports : 5/8" Barbs
• Volts : 12
• GPM : 5
• Impeller : Neoprene
• Amps : 7