CMC Stainless Steel Bolt 6033

CMC Stainless Steel Bolt 6033 (CMC6033) CMC Stainless Steel Bolt #6033 Features: Make sure all nuts and bolts are tight. These should be rechecked frequently for correct tightness. This CMC Stainless Steel Bolt 6033 is a replacement for Jack Plates and Tilt Trim Units. Get this CMC Stainless Steel Bolt for your boat. FOR CMC POWER LIFT: The CMC Power-Lift has been predrilled to fit all standard outboard motor mounting hole configurations. If your boat and motor is not drilled to these specifications, some drilling may be necessary. Consult an installation manual for your outboard for proper mounting dimensions. Be sure to use at least four 1/2" diameter stainless steel bolts and nuts for mounting the Power-Lift to your boat. FOR CMC PT-130 & PT-35 Tilt Trim: The CMC PT-130 has been pre-drilled to fit standard B.l.A. outboard motor mounting hole configurations. If your boat and motor is not drilled to these specifications, some drilling may be necessary. Consult an installation manual for your outboard for proper mounting dimensions. Be sure to use at least l/2‹¨« diameter stainless steel bolts and nuts for mounting the PT-130 to boat. Please read the Owners Manual completely before installing the PT-35. The CMC PT-35 has been pre-drilled on the transom side to mount to the boat. Be sure to use at least 1 1/2 diameter stainless steel bolts and nuts for mounting the PT-35 to the boat. PL-65 Manual         PT-130 Manual        PT-35 Manual         REMINDER: We ship CMC orders from Monday to Thursday (until 1:00 P.M Central Time) except Friday to Sunday orders will be shipped on Monday.  We accept orders within the USA and international. Please Email Us for a less expensive alternative to UPS.